Newton Battery Backup Pump System comprises a Newton NP150 (including non-return valve) combined with a 110 amp hour battery (with battery box) and power converter. The Newton Battery Backup Pump System is Installed into the Newton Titan sump.

The additional Newton NP150 pump is plugged into the converter and operates as a normal mains back-up pump. In the event of a power failure the converter automatically switches to battery power with no loss of backup pump performance. On resumption of normal power supply the converter switches back to mains supply and trickle-charges the battery. It all adds up to complete peace of mind. The use of dual pumps allows one pump to drive the drainage system with the second on standby ready to cut in if there is a pump failure. Normal pumping operation is even assured in the event of a mains power failure providing up to 24 hours of power* generally sufficient to maintain operation through most power cuts experienced in the UK. The Titan chamber also includes a Newton 9V High-water Alarm which is activated if the main pump fails, or total power failure prevents the pumps from working.

Above: the Newton Battery Backup Pump System installed into a Newton Titan.

The Newton Titan sump pump (illustrated above with the backup pump installed) is extremely versatile and can comfortably accommodate two pumps.

In high risk areas (i.e. where there is a risk that flooding can occur) John Newton and Co Ltd recommend the use of an NP400 pump in place of the standard NP150. Your Newton Registered Basement Contractor will be able to advise the appropriate use of pumps - alternatively please contact our Technical Department to discuss your project.

NEWTON BATTERY BACKUP PUMP MAIN FEATURES: CE Certified Pumps. Almost silent operation - best in its class. Just drop in, plumb in, wire up. Includes power converter and 110 amp hour battery unit providing backup power to pumps for up to 24hours*. Pumps can pass 35mm soft solids. Utilising Newton NP150 backup pump. Alternative Newton NP400 pump (recommended for use in areas at risk of flooding).   PUMP SPECIFICATION NP150 Discharge Bore 32mm Max Head 7.2m Flow Rate approx 135 litres/min @2m head Motor Output 150 Watt Max Width 203mm Max Height 319mm Please see specification sheet for full details. PUMP SPECIFICATION NP400 Discharge Bore 50mm Max Head 12.2m Flow rate approx 191 litres/min @2m head Motor Output 400 Watt Max Width 241mm Max Height 328mm Please see specification sheet for full details. Notes: * Actual backup time will depend on pump configuration and usage . If further power protection is required then conection of an external generator is possible. Please discuss your requirements with your Newton Registered Basement Contractor or contact our Technical Department for further advice. Whilst the pumps carry a 1 year manufacturer's warranty, John Newton & Co Ltd recommend that customers should take out an annual maintenance agreement - details of this are supplied with the chamber at delivery. To upgrade an existing Titan using the Newton Battery Backup Pump System the power converter, battery and additional pump can be retrofitted as required - please contact our Technical Department for further advice. Please see the Sump and Pump section of our Product List for further details. John Newton & Co Ltd reserve the right to change product specifications without notice.