Newton Titan
Sump Pump Solution for Basements & Cellars

The Newton Titan is the UK's best selling specialist basement sump pump system. Tried and tested it is available with a choice of lids, i.e. solid for side discharge or holed for top discharge - an extra tough lid is also available upon request. The Newton Titan comes with a choice of Newton Mains Powered Pumps either the Newton NP150 or Newton NP400. The sump has the capacity to take two pumps. The Newton 9V High Water Alarm is an integral part of the Titan system. In the event of a power or pump failure the alarm is activated by a float switch mechanism. The Newton Titan is also easy to install connecting to standard 40mm waste pipe fittings - a slide valve (for maintenance purposes) plus a non-return valve and 40mm connector for each pump is included. To provide extra protection and added peace of mind the optional Newton Battery Backup Pump System is recommended - particularly in areas with a high risk of flooding. There is also an optional Newton Advanced Control Panel that can link to your mobile phone should an alarm occur (please call our our Technical Department for details).

Newton Titan Models: Newton Titan NP150 (includes NP150 pump) Newton Titan NP400 (includes NP400 pump)

Above: Newton Titan NP400 (includes NP400 pump) n.b. please note 40mm pipe work is not included but is readily available from builders and plumbing merchants.

Utilising CE certified pumps. Pumps almost silent operation - best in its class. Just drop in, plumb in, wire up. Chamber can easily take 2 mains pumps enabling installation of optional Newton Backup Pump System Pumps can pass 35mm soft solids. Strong watertight lid. Extra tough & holed lids available (for top exit). Range of Pumps with Vertical float switch for reliable flexible operation High quality alarm with reed float switch. Chamber can be solid or holed. PUMP SPECIFICATION NP150 Discharge Bore 32mm Max Head 7.2m Flow Rate approx 135 litres/min @2m head Motor Output 150 Watt Max Width 203mm Max Height 319mm Please see specification sheet for full details. PUMP SPECIFICATION NP400 Discharge Bore 50mm Max Head 12.2m Flow rate approx 191 litres/min @2m head Motor Output 400 Watt Max Width 241mm Max Height 328mm Please see specification sheet for full details.   Please see the sump and pump section of our Product List for further details. Whilst the pumps carry a 1 year manufacturer's warranty, John Newton & Co Ltd recommend that customers should take out an annual maintenance agreement - details of this are supplied with the chamber at delivery.   John Newton & Co Ltd reserve the right to change product specifications without notice.

John Newton & Co Ltd - Specialist Suppliers to the building industry since 1848