Sales Tel:
020 7237 1217
NEWLATH 2000 - for damp proofing above ground
SYSTEM 500 - for waterproofing below ground
GEODRAIN - for waterproofing below ground external earth retaining walls
DRAINAGE - pumps and drainage systems
FLOORING - newtons industrial flooring membranes
NEWTON MEMBRANES
RESOURCES:
PRODUCTS:
Newton Newlath 2000 damp proofing membrane for above ground applications
Newton Newlath 2000 waterproof CDM with welded mesh for direct rendering for above ground damp proofing applications: walls, gable ends etc

Newton System 500 waterproof membranes - Waterproofing membrane for below ground applications
Newton System 500 Complete underground waterproof system for waterproofing basements, cellars, tunnels & vaults and construction areas
Newton Geodrain - underground external application for earth retaining and facing walls
CDM for waterproofing external earth facing walls applied in newbuild projects or where excavation possible

Newton Drainage products for basement & cellar waterproofing and other undergound building water control applications
Newton Titan Sump Pumps for waterproofing systems in basements & cellars. - drainage using Pump, Basedrain & Baseboard drainage conduit, Geotextile
Newtons Flooring Membranes to prevent damp and water entering through floor
Newton Slimline Flooring can be directly laid on damp floors so finish is rabidly applied, or used as part of a system to control contamination or radon gas - also see System 500 above
SOLUTIONS:

Oil and Salt Contamination?

Generally old buildings or barns suffer from this type of problem as usually no physical type of damp proof course was ever installed. In barns the storage of farm equipment, fertilisers and animals often exacerbated the problem. Traditional render systems (due to extensive and time consuming preparation) often prove expensive.

Solution:

ABOVE GROUND:

Newlath 2000 membrane can be applied directly to the walls to which a rendered or dry-lined finish can be achieved. Being an inert material the oil, salts and damp cannot penetrate the membrane and damage the interior surface, the added advantage of the air filled cavity will add to the thermal integrity of the new building.

If the substrate is uneven and you require a uniform surface, it may use our Newton Frame System prior to the membrane application. Please contact our technical department for more information on the Newton Frame System product.

NOTE:
All our membranes will follow the existing contours of the wall.

Newton's Products used in the Solution:

Newton Newlath 2000
Newton Newlath 2000 Plugs
Newton Mastic
Newton Newlath External Profile
Newton Frame System

BELOW GROUND:

See "Earth retaining Walls" - Section
John Newton & Co Ltd - Specialist Suppliers to the building industry since 1848

© 2002,2003- John Newton & Co Limited - All Rights Reserved