You are here:
Home >
News >
November 2009
November News
Newton are pleased to announce the release of the Newton Titan Pro Pumping System
The Titan Pro specialist basement waterproofing sump system is the most advanced sump and pump system available in the United Kingdom and is designed specifically for use with the Newton System 500. It provides the designer and professional waterproofing contractor a tailor-made solution for all basement waterproofing projects in both New Build and Refurbishment construction.
Key Design Features include
The Titan Pro chamber is designed to have all inlet and outlet connections to be always at the same height relative to the Newton Drainage connections. This is achieved by the sump having a "Fitting Line" to ensure the sump is set at the correct height and an adjustable neck allowing difference in floor finish eight to be taken up and not as with other chambers by physically moving the whole sump up and down.
The unique design includes pre-installed inlet and outlet connections for ease of installation either to a corner or into other areas of the construction (i.e. light wells etc)
All internal pipe work is supplied with the chamber and can accommodate single or dual discharge lines.
The nature of the design means that all pipe work can run through the insulation void created by the Newton System 500.
The Titan Pro system includes all internal pipework, valves and quick release unions for simple removal of the pumps for effective maintenance without the use of jubilee clips.
50mm or 63mm discharge capabilities are available.
For full installation instructions on the Newton Titan Pro please contact our London Head Office on 020 7237 1217