Sales Tel:
020 7237 1217
NEWLATH 2000 - for damp proofing above ground
SYSTEM 500 - for waterproofing below ground
GEODRAIN - for waterproofing below ground external earth retaining walls
DRAINAGE - pumps and drainage systems
FLOORING - newtons industrial flooring membranes
NEWTON MEMBRANES
RESOURCES:
PRODUCTS:
Newton Newlath 2000 damp proofing membrane for above ground applications
Newton Newlath 2000 waterproof CDM with welded mesh for direct rendering for above ground damp proofing applications: walls, gable ends etc

Newton System 500 waterproof membranes - Waterproofing membrane for below ground applications
Newton System 500 Complete underground waterproof system for waterproofing basements, cellars, tunnels & vaults and construction areas
Newton Geodrain - underground external application for earth retaining and facing walls
CDM for waterproofing external earth facing walls applied in newbuild projects or where excavation possible

Newton Drainage products for basement & cellar waterproofing and other undergound building water control applications
Newton Titan Sump Pumps for waterproofing systems in basements & cellars. - drainage using Pump, Basedrain & Baseboard drainage conduit, Geotextile
Newtons Flooring Membranes to prevent damp and water entering through floor
Newton Slimline Flooring can be directly laid on damp floors so finish is rabidly applied, or used as part of a system to control contamination or radon gas - also see System 500 above
SOLUTIONS:

Newtons Drainage Products & Pumps

John Newton manufacture and supply:

Newton Newlath 2000 (for damp proofing above ground)
Newton System 500 (for waterproofing below ground)

The following table shows the other membrane, pump and drainage products distributed by
John Newton and Co Ltd

Titan - Pump & Sump
Newton's Titan range of sump/pump systems for basement and cellars. Used to remove water collected and drained from behind the basement membrane systems.
Basedrain
Buried just below the flooring membrane at the inside wall/floor junction it is used to collect any water drained from behind the waterproof membrane to channel to suitable drainage or a Titan sump/pump.
Baseboard
An alternative to Newton Basedrain above, but sits above the flooring the inside wall/floor junction. In common with Newton Basedrain it is used to collect any water drained from behind the waterproof membrane to channel to suitable drainage or Titan sump/pump.
Geodrain
Studded membrane with bonded Newton Geotex filter fabric for external application. Typically used on the outside of newbuild projects. Geodrain has a built-in filter membrane and relieves hydrostatic pressure to ensure the basement system complies with BS8102.
Slimline Flooring
Waterproof Membrane for Industrial and Domestic Flooring.
Newton 520
20mm stud membrane for flooring, construction drainage applications or tunnel lining.

Also see our handy Newton Product Listing which incorporates our part numbers and a short description of each product.
John Newton & Co Ltd - Specialist Suppliers to the building industry since 1848

© 2002,2003- John Newton & Co Limited - All Rights Reserved